[Mar-2026] Download Real Cisco 300-425 Exam Dumps Test Engine Exam Questions
New 300-425 exam dumps Use Updated Cisco Exam
Cisco 300-425 exam consists of 60-70 multiple-choice and multiple-answer questions that must be completed within 90 minutes. The test assesses various domains, including advanced location services, wireless network design, and WLAN high availability. 300-425 exam is designed to evaluate the candidate's ability to design and implement wireless networks for different scenarios and environments, such as indoor, outdoor, and remote locations.
NEW QUESTION # 83
Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.)
- A. near-far effect
- B. weather
- C. Fresnel zone
- D. power lines
- E. traffic lights
Answer: A,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidel
NEW QUESTION # 84
An engineer must create data-link redundancy for the company's Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. Interface connection to two separate nonstacked switches is available.
- B. Packets are always sent out on the same port they are received on.
- C. The same port has multiple untagged dynamics interfaces.
- D. Full bandwidth of all links is available.
- E. Ports are grouped into multiple LAGs.
- F. All interface traffic passes as long as one port is up.
Answer: D,E,F
Explanation:
LAG-based redundancy is chosen for its ability to provide continuous connectivity as long as one port in the LAG is operational (B), utilize the full bandwidth capacity of all the links in the LAG (E), and allow for the grouping of ports into multiple LAGs for increased redundancy and bandwidth (F). References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.
NEW QUESTION # 85
When a wireless network is designed for location services, how many APs must be heard by each location-ready AP at a signal level of -75 dBm or better?
- A. at least four APs
- B. three APs
- C. no more than three APs
- D. two APs
Answer: A
Explanation:
For accurate location services, it is recommended that each location-ready AP hears at least four other APs at a signal level of -75 dBm or better. This ensures sufficient signal overlap and triangulation accuracy for reliable client location tracking. References: Cisco's guidelines on wireless network design for location services.
NEW QUESTION # 86
Which statement about creating a mobility group is true, excluding mobility anchors?
- A. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
- B. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
- C. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
- D. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
Answer: D
Explanation:
NEW QUESTION # 87
An engineer is designing a solution where guests terminate on an anchor controller in the DMZ. The engineer is having issues and wants to test connectivity between members of a mobility group. Which command must be issued to test whether a mobility control packet is able to be reached over the management interface?
- A. show logging
- B. tracert
- C. mapping
- D. mapping
Answer: D
NEW QUESTION # 88
A customer has this wireless design:
- two Cisco Catalyst 9800 Series wireless controllers that are
configured in a high-availability SSO cluster to manage the APs in a
local office network
- 100 APs in local mode that are registered to the high-availability
cluster
- one Catalyst 9800 Series wireless controller that is deployed as an
anchor in a DMZ
- a CAPWAP tunnel in UP state between the high-availability cluster and the anchor WLC The customer wants the anchored traffic to remain up if a single WLC in the high-availability cluster fails. How must this requirement be incorporated into the design?
- A. Configure the mobility MAC address for the high-availability cluster.
- B. Create a separate EoIP tunnel for each WLC in the high-availability cluster.
- C. Configure the APs with the high-availability cluster as the primary base.
- D. Deploy EMC APs as anchors and configure a high-availability cluster.
Answer: A
Explanation:
To ensure the anchored traffic remains up if a single WLC in the high-availability cluster fails, the mobility MAC address for the high-availability cluster should be configured. This allows the APs to recognize the cluster as a single entity, maintaining the CAPWAP tunnel to the anchor WLC in the DMZ even if one of the WLCs in the cluster fails.
NEW QUESTION # 89
Refer to the exhibit. An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?
- A. Encrypted mobility is being used in the 5520 configuration leading to data path down.
- B. The certificate hash key is incorrect leading to data path down.
- C. The data-link-encryption configuration is missing from the 9800-CL configuration.
- D. CAPS is used to key in MAC address in the IOS_XE configuration leading to data path down.
Answer: C
NEW QUESTION # 90
An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located In a building at the entrance of a sports complex Which type of antenna should be used with the RAP for backhaul connectivity?
- A. 5 GHz. 8-dBi omnidirectional antenna
- B. 2 4 GHz. 14-dBi omnidirectional antenna
- C. 2.4 GHz. B-dBi patch antenna
- D. 5 GHz. 14-dBi patch antenna
Answer: A
Explanation:
The AP1524PS includes three radios: a 2.4 -GHz, a 5.8- GHz, and a 4.9-GHz radio. The 2.4-GHz radio is for client access (non- public safety traffic) and the 4.9-GHz radio is for public safety client access traffic only. The 5.8-GHz radio can be used as the backhaul for both public safety and non-public safety traffic.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/ b_cg76_chapter_010000001.html
NEW QUESTION # 91
A wireless engineer is designing a wireless network for a campus. Which two parameters can have a negative effect on the Wi-Fi coverage of an access point? (Choose two.)
- A. surrounding area
- B. type of the antenna used
- C. authentication used
- D. wireless encryption
- E. wireless channels
Answer: A,B
Explanation:
NEW QUESTION # 92
A customer uses a Cisco Catalyst 9800 Series wireless controller to manage all of the APs for a campus network. Secure guest access is required for the guest network. A Cisco 5520 anchor controller is deployed within a DMZ. Which design approach ensures that the mobility tunnel is established successfully between the wireless controller and the anchor controller?
- A. Enable control plane encryption on the wireless controller.
- B. Run an Inter-Release Controller Mobility compatible software version on the anchor controller.
- C. Run an Inter-Release Controller Mobility compatible software version on the wireless controller.
- D. Disable data link encryption on the anchor controller.
Answer: C
NEW QUESTION # 93
An engineer changed the TPC Power Threshold for a wireless deployment from the default value to -65 dBm.
The engineer conducts a new post-deployment Survey to validate the results. What is the expected outcome?
- A. Increase cell size
- B. Increased received sensitivity
- C. Decreased channel overlap
- D. Decreased client signal strength
Answer: D
Explanation:
Changing the TPC Power Threshold to -65 dBm would generally result in a decrease in the transmit power of APs to maintain a smaller cell size. This helps in reducing interference and improving overall network performance. A lower threshold means the APs reduce their power to ensure the signal does not exceed -65 dBm, leading to decreased signal strength at the client side.
NEW QUESTION # 94
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high cochannel interference. Which profile can be used to adjust the parameters for these high-density APs?
- A. ISE profile
- B. AVC profile
- C. RF profile
- D. QoS profile
Answer: C
Explanation:
In a high-density environment like an auditorium, where APs are in close proximity and a large number of devices are connected, the RF profile is used to adjust the radio frequencies of the APs to minimize co-channel interference. The RF profile allows for the configuration of power levels, channel width, and channel assignment to optimize wireless performance and reduce interference. Reference: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice
NEW QUESTION # 95
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
- B. Paint the access point to cover the LED from being noticeable.
- C. Deploy environmentally friendly cabling components to blend into the environment.
- D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
Answer: C
Explanation:
NEW QUESTION # 96
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?
- A. 20%
- B. 30%
- C. 40%
- D. 50%
Answer: A
Explanation:
NEW QUESTION # 97
A network engineer is retorting an existing building wired with Category 5e with Cisco Aironet 3800 Series APs and mGig switches. Which cable length allows for 5G operation?
- A. 150 m
- B. 130 m
- C. 70 m
- D. 120 m
Answer: B
Explanation:
The Cisco Aironet 3800 Series APs support mGig, which allows for higher throughput over existing cabling. However, the maximum cable length that supports 5G operation is limited by the quality of the cable and signal attenuation. Category 5e cabling can support 5G operation up to a length of 130 meters, which is within the acceptable range for maintaining the required signal integrity for 5G speeds.
NEW QUESTION # 98
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?
- A. 20%
- B. 50%
- C. 30%
- D. 40%
Answer: B
Explanation:
Cisco Hyperlocation requires a high degree of accuracy in client location tracking. A recommended cell overlap of 50% ensures that client devices are consistently within the range of multiple access points, which improves location accuracy and reliability. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.
NEW QUESTION # 99 
Refer to the exhibit. An enterprise is using wireless as the main network connectivity for clients. To ensure service continuity. a pair of controllers will be installed in a datacentre. An engineer is designing SSO on the pair of controllers. What needs to be included in the design to avoid having the secondary controller go into maintenance mode?
- A. The connection between the redundancy ports is missing.
- B. The redundancy port must be the same subnet as the redundancy mgmt.
- C. The Global Configuration of SSO is set to Disabled on the controller.
- D. The Keep alive timer is too low. which causes synchronization problems.
Answer: A
Explanation:
For Stateful Switchover (SSO) to function correctly, the redundancy ports on both the primary and secondary controllers must be directly connected. This allows for the necessary state and configuration information to be synchronized between the two controllers, preventing the secondary controller from entering maintenance mode in the event of a failover.
NEW QUESTION # 100
Refer to the exhibit. An engineer must design a mobility group that has these requirements:
- The mobility group must consist of five WLCs.
- All WLCs must run software version 8.0 or later.
- The WLCs must connect via an IPv4 network.
- Two of the WLCs must be in an SSO high availability pair.
Which two configurations must be included in the design? (Choose two.)
- A. The WLAN SSID must be consistent across all the WLCs.
- B. Only WLCs in an SSO high availability pair must use the same virtual IP address.
- C. All the WLCs must be of the same model or type.
- D. All the WLCs must run the same software version.
- E. Each WLC must use the same mobility domain name.
Answer: D,E
NEW QUESTION # 101
An engineer is designing a point-to-multipoint mesh network. Which two AP configurations must be completed for a site survey? (Choose two.)
- A. MAP hostnames
- B. bridge group name
- C. Rx power
- D. Tx power
- E. mesh on 2.4 GHz band
Answer: C,D
NEW QUESTION # 102
Based on a wireless network design, an engineer configured a primary and secondary controller for their APs. A power interruption caused the primary Cisco WLC to go down, and, as expected, all APs joined the secondary controller. When the primary controller came back up, all the APs remained joined to the secondary controller. Which approach must the engineer take for the APs to move back to the primary?
- A. Set AP Fallback to Enabled on the primary controller.
- B. Set AP Fail over Priority to 4 on each AP.
- C. Set AP Fallback to Enabled on the secondary controller.
- D. Set AP Fail over Priority to Critical globally.
Answer: A
NEW QUESTION # 103
A customer has two Cisco WLCs configured in a SSO cluster. The wireless network supports a large warehouse. The customer purchases new iPads to replace legacy scanners. Both devices connect to a single SSID named Scanning by using WPA2 Personal. The customer wants to use a standards-based method for fast roaming on the new iPads. Which approach meets the scanner requirement and still supports the legacy scanners?
- A. Enable optimized roaming globally and enable FT PSK on the Scanning SSID.
- B. Enable optimized roaming globally and enable FT 802.1X on the Scanning SSID.
- C. Enable FT PSK and set Fast Transition to Adaptive for the Scanning SSID.
- D. Enable FT 802.1X and set Fast Transition to Adaptive for the Scanning SSID.
Answer: C
NEW QUESTION # 104
An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the Aps. The wireless clients should be able to roam between the APs and the controllers. Which type of wireless architecture should be used?
- A. distributed
- B. centralized
- C. cloud
- D. autonomous
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob
41dg-wrapper/ch2_Arch.html
NEW QUESTION # 105
Based on a wireless network design, an engineer configured a primary and secondary controller for their APs.
A power interruption caused the primary Cisco WLC to go down, and, as expected, all APs joined the secondary controller. When the primary controller came back up, all the APs remained joined to the secondary controller. Which approach must the engineer take for the APs to move back to the primary?
- A. Set AP Fallback to Enabled on the primary controller.
- B. Set AP Fail over Priority to 4 on each AP.
- C. Set AP Fallback to Enabled on the secondary controller.
- D. Set AP Fail over Priority to Critical globally.
Answer: A
Explanation:
AP Fallback is a feature that allows APs to rejoin their primary controller after they have connected to a secondary controller due to a failure. By enabling AP Fallback on the primary controller, the APs will automatically rejoin it when it becomes available again after a power interruption. This ensures that APs return to their designated primary controller for normal operations.
NEW QUESTION # 106
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
- B. Paint the access point to cover the LED from being noticeable.
- C. Deploy environmentally friendly cabling components to blend into the environment.
- D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
Answer: C
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION # 107
......
Pass Your 300-425 Dumps as PDF Updated on 2026 With 351 Questions: https://www.exam4docs.com/300-425-study-questions.html
Verified 300-425 Dumps Q&As - 300-425 Test Engine with Correct Answers: https://drive.google.com/open?id=1zNnq49M22lirAhV3dRZxxUm9YsidtmF0
