Ensure Success With Updated Verified HPE6-A81 Exam Dumps [2023]
Exam Materials for You to Prepare & Pass HPE6-A81 Exam.
Preparing for the HPE6-A81 exam requires a deep understanding of ClearPass technology, as well as practical experience in designing and deploying ClearPass solutions. Candidates can take advantage of Aruba's official training courses and study materials, as well as practice exams and hands-on labs, to prepare for the exam and ensure success in earning the ACCX certification.
The HP HPE6-A81 certification exam is an expert-level exam designed for professionals who work with Aruba ClearPass technology. It is an important credential for IT professionals who work in organizations with large and complex networks, where network access control is critical to the security of the network. To prepare for the exam, individuals can take advantage of a range of resources, including training courses, study guides, and practice exams.
NEW QUESTION # 35
When building an SNMP-based enforcement profile what option can you assign to the user as actions? (Select three).
- A. ClearPass Downloadable Role
- B. Send captive portal web re-direct URL
- C. Set a session timeout for the client
- D. Enforce a VLAN ID for the client
- E. Reset the connection after the settings has been pushed
- F. Enforce Firewall policies
Answer: B,C,D
NEW QUESTION # 36
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- B. Have all of the BYOO clients disconnect and reconnect to the network.
- C. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
- D. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
Answer: A,B,C
NEW QUESTION # 37
Refer to the exhibit.
A customer with multiple Aruba Controllers has just installed a new certificate for "'.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.
- A. Add PTR records on the DNS server for "securelogin arubanetworks.com".
- B. Change the 'IP Address field to" securelogin.customerdomain.com
- C. Change the "Secure Login' field to "Use Vendor Default".
- D. Change the "IP Address field to "captiveportal-login.customerdomain.com".
Answer: D
NEW QUESTION # 38
Refer to the exhibit.
What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?
- A. Deny Access Profile
- B. Redirect to Aruba OnBoard Portal
- C. Redirect to Aruba Dissolvable_page Profile
- D. Redirect to Aruba Quarantine Profile
Answer: C
NEW QUESTION # 39
Refer to the exhibit.
A customer is doing a new ClearPass installation and is setting up clustering between two ClearPass servers running a 6.8.6 version. The ClearPass server failed to add the subscriber node. The customer was able to login to the console of the ClearPass server with the same CLI password used during the cluster setup. The customer has sent you the screenshots seeking your support Why did an attempt to add a subscriber node failed showing that error?
- A. The subscriber server is running with a default self -signed HTTPS certificate
- B. The default database certificate used in the publisher server is not a valid certificate
- C. The subscriber server is running with a public signed and trusted HTTPS certificate
- D. The data and time in the subscriber was not synchronized with the NTP server
Answer: A
NEW QUESTION # 40
Refer to the exhibit.
What could be causing the error message received on the OnGuard client?
- A. The client's OnGuard Agent has not been configured with the correct Policy Manager Zone.
- B. There is a firewall policy not allowing the OnGuard Agent to connect to ClearPass
- C. The Health-Check service does not have Posture Compliance option enabled
- D. The Service Selection Rules for the service are not configured correctly
Answer: D
NEW QUESTION # 41
Refer to the exhibit.
A year ago. your customer deployed an Aruba ClearPass Policy Manager Server for a Guest SSID hosted in an IAP Cluster The customer just created a new Web Login Page for the Guest SSiD Even though the previous Web Login page worked test with the new Web Login Page are failing and the customer has forwarded you the above screenshots.
What recommendation would you give the customer to fix the issue?
- A. The customer should reset the password for the username accxCdlexam.com using Guest Manage Accounts.
- B. The Address filed under the WebLogin Vendor settings is not configured correctly. It should be set to instant, Aruba networks com,
- C. The WebLogin Pre-Auth Check is set to Aruba Application Authentication which requires a separate application service on the policy manager
- D. The service type configured is not correct. The Guest authentication should be an Application authentication type of service.
Answer: B
NEW QUESTION # 42
The customer has configured the guest self-registration with sponsor approval. The guest users that the sponsor email and the other requested details while registering the account but the users were able to complete the authentication and access the internet without the sponsor's approval.
What configuration settings will you check to make this setup work?
- A. Check if sponsor confirmation is enabled in the self-registration page
- B. Check if sponsor name field is enabled in the register form page
- C. Check if sponsor email field is enabled in the register form page
- D. Check if authentication option n is enabled in the self-registration page enabled.
Answer: C
NEW QUESTION # 43
Refer to the exhibit.
You configured a new Wireless 802.1 X service for a Cisco WLC broadcasting the secure-AOM-5007 SSID. The client fails to connect to the SSIO. Using the screenshots as a reference, how would you fix this issue?
- A. Make sure that the Network Devices entry for the Cisco WLC has a vendor setting of "Airespace"
- B. Remove the service condition Radius:IETF Service-Type BEL0NGS_T0 Login-User (1), 2.8
- C. Update the service condition Radws:IETF Called-Stat ion-Id CONTAINS secure-AOM-5007
- D. Change the service condition to Radius:lETF Calling-Station-Id EQUALS Secure-ADM-5007
Answer: C
NEW QUESTION # 44
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
- B. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- C. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
- D. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
Answer: C
NEW QUESTION # 45
Refer to the exhibit.
A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason'
- A. The OnGuard Agent trigger the events based on changing the Health Status.
- B. OnGuard Web-Based Health Check interval has been configured to three minutes.
- C. TCP port 6658 is not allowed between the client and the ClearPass server.
- D. The OnGuard Agent is connecting to the Data Port interface on ClearPass.
Answer: B
NEW QUESTION # 46
What is the Secure SSIO (otherwise referred to as Single SSID) OnBoard deployment service workflow?
- A. Onboard Authorization Application service. Onboard Provisioning RADIUS service Onboard
- B. Onboard Provisioning RADIUS service, Onboard Authorization Application service, Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service,
- C. Provisioning RADIUS service. Onboard Pre-Auth RADIUS service. Onboard Authorization Application service. Onboard Provisioning RADIUS service.
- D. Onboard Authorization RADIUS service. Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service. Onboard Prt-Auth Application service.
Answer: A
NEW QUESTION # 47
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Save the "template" page as Master Self'Registration page.
- B. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
- C. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
- D. Save this "template" page as a new Skin to be used on other Self-Registration pages.
Answer: A
NEW QUESTION # 48
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?
- A. Local User Database
- B. Clear Pass Profiler Database
- C. Endpoint Database
- D. Guest Device Database
Answer: D
NEW QUESTION # 49
Which statements are true about that integration between ClearPass Policy Manager and ClearPass Device Insight? (Select two)
- A. An attribute named Device Insight Tags art added to the Endpoints that art available to use in service, role-mapping, and enforcement policy Rules
- B. ClearPass Device Insight updates ClearPass Policy Manager every 60 minutes if it detects a change in device classification like device spoofing.
- C. Policy Manager stops using ClearPass Profiler for fingerprinting and uses Device Insight Analyzer instead for endpoint in-depth data analysis.
- D. When Device Insight integration mode is enabled. you can still use Update Fingerprint button to Update Endpoints at Configuration > Identity > Endpoints
- E. To provide enhanced profiling and reporting. additional configuration is required to transmit data in both directions between CPPM and Device Insight.
Answer: D,E
NEW QUESTION # 50
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)
- A. The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs
- B. The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.
- C. Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication
- D. The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.
- E. The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.
- F. Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.
Answer: A,B,C
NEW QUESTION # 51
......
Updated HPE6-A81 Certification Exam Sample Questions: https://www.exam4docs.com/HPE6-A81-study-questions.html
Pass Your HPE6-A81 Exam at the First Try with 100% Real Exam: https://drive.google.com/open?id=1-JBgKtosIR_xSoXvv6IOZnzRoQT4nKMC
