Nov-2021 Latest Exam4Docs HPE6-A66 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new HPE6-A66 Real Exam Questions!
NEW QUESTION 14
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. SmartRate
- B. SFP
- C. QSFP28
- D. QSFP+ LC
Answer: A
NEW QUESTION 15
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B + C
- B. A + C
- C. A + B + C + D
- D. A + B
Answer: C
NEW QUESTION 16
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 0
- B. 2930F
- C. 3810M
- D. 1
Answer: B
NEW QUESTION 17
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11r
- C. 802.11 ax
- D. S02.11h
Answer: C
NEW QUESTION 18
Which feature does the Aruba AP 387 support?
- A. 60GHZRF
- B. 802.11 ax
- C. Indoor usage
- D. included external directional antennas
Answer: A
NEW QUESTION 19
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. encountering RF interference by devices
- B. providing consistent performance on all available channels
- C. implementing adequate security measures to ensure PCI compliance
- D. determining the RF channel bandwidth consumed per Barcode scanner
- E. roaming between APs
Answer: B,C
NEW QUESTION 20
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 10 Gbps
- B. 5 Gbps
- C. 2.5 Gbps
- D. 1 Gbps
Answer: C
NEW QUESTION 21
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. Backplane stacking
- B. VSF
- C. Distributed trunking
- D. VSX
Answer: D
NEW QUESTION 22
Which type of Aruba AP uses its radio as its back-haul connection?
- A. Air Monitor (AM)
- B. Remote AP (RAP)
- C. Mesh Point
- D. Mesh Porta
Answer: D
NEW QUESTION 23
Which must you perform in IRIS to assign a device to a Design Group?
- A. Right-click the device and select Set Layer Membership
- B. Right-click the device and select Set Design Group
- C. Drag and drop the device into the Site
- D. Drag and drop the device into the Design Group
Answer: D
NEW QUESTION 24
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 7240XM
- B. 0
- C. 1
- D. 2
Answer: C
NEW QUESTION 25
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 47.000 square feet {4,365 square meters)
- B. 56.350 square feet {5,235 square meters)
- C. 55.750 square feet {5,175 square meters)
- D. 338,100 feet {31,410 square meters)
Answer: B
NEW QUESTION 26
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Passive
- B. Virtual
- C. Active
- D. Spectrum clearing
Answer: C
NEW QUESTION 27
A network architect needs to plan a new wireless network
- A. Airwave, Central, Windows, Mac OSX, and Linux
- B. Central only
- C. Airwave, Central, and Windows only
- D. Airwave and Central only
Answer: D
NEW QUESTION 28
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 2930M
- B. 2930F
- C. 5406R
- D. 0
Answer: D
NEW QUESTION 29
Which feature does the Aruba AP 555 support? (Select two.)
- A. desk wall plate mounted
- B. high density indoor locations
- C. 802.11ac and lower standards only
- D. weather proof and temperature hardened
- E. three radios
Answer: B,C
NEW QUESTION 30
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. iPsec tunneling
- B. GRE tunneling
- C. PAPI mobility
- D. Dynamic segmentation
Answer: A
NEW QUESTION 31
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 2930F switches
- B. 5406R switches
- C. 2930M switches
- D. 3810M switches
Answer: C
NEW QUESTION 32
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 375 with external omnidirectional antennas
- B. AP 365 with integrated omnidirectional antennas
- C. AP 510 with external omnidirectional antennas and plastic AP cover
- D. AP 318 with external omnidirectional antennas
Answer: D
NEW QUESTION 33
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan View
- B. Define the appropriate dimensions of a Floorplan and Building View
- C. Define the appropriate dimensions of each object in a Floorplan View
- D. Define the appropriate dimensions of each room in a Floorplan View
Answer: C
NEW QUESTION 34
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Campus
- B. New Express Mode
- C. New Project
- D. New Site
Answer: A
NEW QUESTION 35
Which AP mode allows an AP to operate autonomously?
- A. RAP
- B. AM
- C. OCAP
- D. IAP
Answer: C
NEW QUESTION 36
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Two 7030 mobility controllers in a cluster
- B. A standalone 7008 controller per floor
- C. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- D. Two 7205 mobility controllers in a cluster
Answer: C
NEW QUESTION 37
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 40 MHZ
- B. 10MHZ
- C. 60 MHZ
- D. 20 MHz
Answer: C
NEW QUESTION 38
......
Resources From:
- 2021 Latest Exam4Docs HPE6-A66 Exam Dumps (PDF & Exam Engine) Free Share: https://www.exam4docs.com/HPE6-A66-study-questions.html
- 2021 Latest Exam4Docs HPE6-A66 PDF and HPE6-A66 Exam Dumps Free Share: https://drive.google.com/open?id=11l-C6c8jlaB1f_ycVAUjKSIQXMqhJQBe
Free Resources from Exam4Docs, We Devoted to Helping You 100% Pass All Exams!
