[May 26, 2023] Free VMCE VMCE2021 Exam Question
VMCE2021 dumps & VMCE sure practice dumps
NEW QUESTION # 47
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- B. If a VM within the replication job is not mapped, the job will fail
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
Answer: A
NEW QUESTION # 48
After you selected Incremental mode in the job settings, how do you ensure the forever forward incremental backup mode is configured?
- A. Check the "Use Forever Forward Incremental" box
- B. Enable"Transform previous backup chains into rollbacks"box
- C. Disable synthetic full backups and active full backups
- D. Enable synthetic full backups and/or active full backups
Answer: C
Explanation:
Do not enable synthetic full backups and/or active full backups. If you enable synthetic and/or active full backups, Veeam Backup & Replicationwill produce a forward incremental backup chain.
https://helpcenter.veeam.com/backup/vsphere/incremental_forever_backup.html
NEW QUESTION # 49
Which of the following is an extension for a full backup file if the Reverse Incremental Backup mode is used?
- A. .vrb
- B. .vbk
- C. .vbr
- D. .vbi
Answer: B
NEW QUESTION # 50
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- B. Configure a backup copy job in mirror mode, to a repository on the second site
- C. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
Answer: C
NEW QUESTION # 51
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks: 192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is 172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query. Which of the following virtual lab types must be configured?
- A. Basic single-host
- B. Advanced single-host
- C. Advanced multi-host
- D. All virtual lab configurations would support that
Answer: B
NEW QUESTION # 52
A director in a business needs a folder of traffic photos restored from a Linux server. This machine sits on a VM backed up by Veeam Backup & Replication. The director wants the files restored to their original location and does not want to lose the original files. What functionality will be used to restore the folder using the Veeam Guest OS restoration wizard?
- A. Restore the files using the "Versioning" function. Files will be prefixed with numbers (1-, 2-, 3-, etc.).
- B. Restore the files using the "Keep" function. Original files will be untouched
- C. Restore the files using the "Hold" function. The director can then determine the status of the original and restored files.
- D. Restore the files using the "Overwrite" function. Original files will be renamed.
Answer: B
Explanation:
According to the Veeam Backup & Replication user guide1, you can use the Guest File Restore wizard to restore files and folders from VM guest OSes that run Linux or other non-Windows OSes2. The wizard allows you to choose how to handle situations when restored files already exist on the target location3.
Therefore, if you want to restore the folder of traffic photos to their original location and do not want to lose the original files, you should use the Keep function. This function will preserve original files on disk and will not overwrite them with restored files
NEW QUESTION # 53
Which types of jobs can be sent to tape using a "Backup to Tape" job? (Choose two.)
- A. Replication
- B. Backup Copy
- C. Configuration Backup
- D. Backup
Answer: B,D
Explanation:
https://forums.veeam.com/tape-f29/backup-copy-job-to-tape-t27577.html
NEW QUESTION # 54
Which of the following statements are true when comparing a synthetic full backup to an active full backup, on a NTFS-based Backup Repository? (Choose two.)
- A. In terms of content and retention, the synthetic full backup file is identical to an active full backup file
- B. The synthetic full backup file has a .vsb extension, whereas the active full backup has a .vbk extension
- C. If the backup repository performance is weak, creating synthetic full backups is the best choice
- D. Synthetic full backups impose less load on the production environment
- E. Synthetic full backups consume more network bandwidth
Answer: A,D
NEW QUESTION # 55
Which of the following options should be selected in order to temporarily bring up a production VM that has been previously been replicated to the DR site, while the production VM itself is brought down by a problem?
- A. Failover Plan
- B. Planned Failover of the Replica VM
- C. Failover of the Replica VM
- D. Failback of the Replica VM
Answer: B
NEW QUESTION # 56
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason? (Choose two.)
- A. The VMs were moved to different datastores manually
- B. The VM is in a backup chain and trapped inside a single retention file
- C. Jobs are configured as per VM and these particular VM's need more fulls
- D. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
- E. VM retention is set to do full backups more often than others in the job
Answer: A,C
NEW QUESTION # 57
What is the purpose of scheduling a virtual synthesized full backup for tape jobs? (Choose two.)
- A. To be able to create the synthetic full backup directly on tape
- B. To be able to offload forever forward incremental backups to tape
- C. To avoid copying a full VBK file to tape from the source Reverse Incremental Backup Job
- D. To be able to restore files and folders from tape
Answer: A,B
NEW QUESTION # 58
When VMware vSphere CBT is not available, Veeam Backup & Replication:
- A. Uses Veeam's proprietary
- B. Sends an e-mail alert that VMware vSphere CBT is disabled
- C. Resets VMware vSphere CBT which requires to power the VM off
- D. Runs a new active full backup
Answer: A
NEW QUESTION # 59
Veeam Backup & Replication supports Dell EMC Data Domain storage systems working over the following protocols. (choose the 2 appropriate options)
- A. TCP/IP
- B. FCoTR
- C. FTP
- D. FC
Answer: A,D
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/emc_dd.html?ver=95
NEW QUESTION # 60
Veeam Explorer for Microsoft Active Directory offers which of the following capabilities? (Choose two.)
- A. Support for Microsoft Active Directory on Windows Server 2000 or newer
- B. Send an object/container as an attachment via email
- C. Export an object/container as a Personal Folder File (.pst)
- D. Restore a single object to an Active Directory Domain Services server
- E. Restore a container to an Active Directory Domain Services server
Answer: D,E
NEW QUESTION # 61
Hotspot Question
Match the following Veeam resource with the corresponding usage example:
Answer:
Explanation:
NEW QUESTION # 62
When configuring an On-Demand Sandbox, when should the Backup Administrator indicate that the Application Group should keep running once the job completes?
- A. When creating an Application Group
- B. When running a SureBackup job
- C. When configuring a SureBackup job
- D. When configuring a Virtual Lab
Answer: A
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_job_appgroup_vm.html?ver=95 u4
NEW QUESTION # 63
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The other restore points are weekly full backups, this is expected
- B. The old restore points will be deleted after the new restore chain meets the retention policy
- C. You should configure the synthetic full backup to be performed on Mondays instead
- D. Per VM backup files are enabled in the repository
Answer: B
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/synthetic_full_hiw.html?ver=100
NEW QUESTION # 64
Which of the following are among the requirements for an off-host backup proxy server? (Choose four.)
- A. Veeam Backup from Storage Snapshot must be enabled
- B. The hardware VSS provider must be configured
- C. The version of the Hyper-V host and the off-host backup proxy must match
- D. The proxy server must access the shared storage where the VM's reside
- E. Hyper-V must be Windows 2012 or Windows 2012 R2
- F. The Hyper-V Role must be installed
Answer: B,C,D,F
NEW QUESTION # 65
......
Veeam VMCE2021 Actual Questions and Braindumps: https://www.exam4docs.com/VMCE2021-study-questions.html
Pass VMCE2021 Exam with Updated VMCE2021 Exam Dumps PDF 2023: https://drive.google.com/open?id=1hvIb1jXSQzqXqrylx6ZbIWMCMNRDifH7
