Master 2021 Latest The Questions CCNP Data Center and Pass 300-620 Real Exam! [Q27-Q48]

Share

Master 2021 Latest The Questions CCNP Data Center and Pass 300-620  Real Exam!

Penetration testers simulate 300-620 exam PDF

NEW QUESTION 27
Which type of port is used for in-band management within ACI fabric?

  • A. spine switch port
  • B. management port
  • C. APIC console port
  • D. leaf access port

Answer: C

 

NEW QUESTION 28
Refer to the exhibit.

Which two objects are created as a result of the configuration? (Choose two.)

  • A. bridge domain
  • B. endpoint group
  • C. application profile
  • D. VRF
  • E. attachable AEP

Answer: A,D

 

NEW QUESTION 29
When Cisco ACI connects to an outside Layers 2 network, where does the ACI fabric flood the STP BPDU frame?

  • A. between all the spine and leaf switches
  • B. within the APIC
  • C. within the access encap VLAN
  • D. within the bridge domain

Answer: D

Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c07-732033.html#_Toc395143571

 

NEW QUESTION 30
What happens to the traffic flow when the Cisco ACI fabric has a stale endpoint entry for the destination endpoint?

  • A. The leaf switch does not learn the source endpoint through data plane learning.
  • B. The leaf switch sends the traffic to the wrong destination leaf.
  • C. The leaf switch floods the traffic to the endpoint throughout the fabric.
  • D. The leaf switch drops the traffic that is destined to the endpoint.

Answer: D

Explanation:
Section: ACI Packet Forwarding
Explanation/Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKACI-2641.pdf

 

NEW QUESTION 31
Which table holds IP address, MAC address and VXLAN/VLAN information on a Cisco ACI leaf?

  • A. endpoint
  • B. ARP
  • C. RIB
  • D. adjacency

Answer: A

Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739989.html

 

NEW QUESTION 32
Refer to the exhibit.

Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)

  • A. apic2
  • B. Leaf1
  • C. Spine1
  • D. apic1
  • E. Leaf2
  • F. Spine2

Answer: C,F

 

NEW QUESTION 33
Refer to the exhibit.

A Cisco ACI fabric is newly deployed, and the security team requires more visibility of all inter-EPG traffic flows. All traffic in a VRF must be forwarded to an existing firewall pair. During fallover, the standby firewall must continue to use the same IP and MAC as the primary firewall. Drag and drop the steps from the left Into the Implementation order on the right to configure the service graph that meets the requirements. (Not all steps are used.)

Answer:

Explanation:

Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/L4-L7_Services_Deployment/guide/b
* Create a service bridge domain and a layer 4 to layer 7 device within one cluster interface.

 

NEW QUESTION 34
What represents the unique identifier of an ACI object?

  • A. application programming interface
  • B. distinguished name
  • C. universal resource identifier (URI)
  • D. management information tree

Answer: B

 

NEW QUESTION 35
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.

Answer:

Explanation:

 

NEW QUESTION 36
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.

Answer:

Explanation:

Explanation
Application profile---> VRF--> Bridge Domain---> EPG

 

NEW QUESTION 37
What do Pods use to allow Pod-to-Pod communication in a Cisco ACI Multi-Pod environment?

  • A. over Layer 3 Out connectivity via border leafs
  • B. over Layer 3 directly connected back-to-back spines
  • C. over Layer 3 IPN connectivity via border leafs
    https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737855.html
  • D. over Layer 3 IPN connectivity via spines

Answer: D

 

NEW QUESTION 38
On which two interface types should a user configure storm control to protect against broadcast traffic?
(Choose two.)

  • A. APIC facing interfaces
  • B. port channel on a single leaf switch
  • C. all interfaces on the leaf switches in the fabric
  • D. endpoint-facing trunk interface
  • E. fabric uplink interfaces on the leaf switches

Answer: B,D

 

NEW QUESTION 39
Refer to the exhibit.

Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?

  • A. L3Out
  • B. L3
  • C. Unicast
  • D. Routed

Answer: D

 

NEW QUESTION 40
A situation causes a fault to be raised on the APIC. The ACI administrator does not want that fault to be raised because it is not directly relevant to the environment. Which action should the administrator take to prevent the fault from appearing?

  • A. Create a stats threshold policy with both rising and falling thresholds defined so that the critical severity threshold matches the squelched threshold.
  • B. Under System -> Faults, right-click on the fault and select Acknowledge Fault so that acknowledged faults will immediately disappear.
  • C. Create a new global health score policy that ignores specific faults as identified by their unique fault code.
  • D. Under System -> Faults, right-click on the fault and select Ignore Fault to create a fault severity assignment policy that hides the fault.

Answer: D

Explanation:
Section: ACI Fabric Infrastructure

 

NEW QUESTION 41
Which two types of interfaces are supported on border leaf switches to connect to an external router? (Choose two.)

  • A. FEX host interface
  • B. subinterface with VXLAN tagging
  • C. Switch Virtual Interface
  • D. subinterface with 802.1Q tagging
  • E. out of band interface

Answer: C,D

 

NEW QUESTION 42
Which statement regarding ACI Multi-Pod and TEP pool is true?

  • A. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
  • B. The same TEP pool is used in all Pods.
  • C. A different TEP pool must be assigned to each Pod.
  • D. The IP addresses used in the IPN network can overlap TEP pool of the APIC.

Answer: C

 

NEW QUESTION 43
Which endpoint learning operation is completed on the ingress leaf switch when traffic is received from a Layer 3 Out?

  • A. The source IP address of the traffic is learned as a remote endpoint.
  • B. The source MAC address of the traffic is learned as a remote endpoint.
  • C. The source MAC address of the traffic is learned as a local endpoint.
  • D. The source IP address of the traffic is learned as a local endpoint.

Answer: B

 

NEW QUESTION 44
Which statement regarding ACI Multi-Pod and TEP pool is true?

  • A. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
  • B. The same TEP pool is used in all Pods.
  • C. A different TEP pool must be assigned to each Pod.
  • D. The IP addresses used in the IPN network can overlap TEP pool of the APIC.

Answer: C

Explanation:
Section: ACI Anywhere
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739714.html

 

NEW QUESTION 45
An engineer must deploy Cisco ACI across 10 geographically separated data centers. Which ACI site deployment feature enables the engineer to control which bridge domains contain Layer 2 flooding?

  • A. Multi-Site
  • B. Multi-Pod
  • C. Stretched Fabric
  • D. GOLF

Answer: A

 

NEW QUESTION 46
Which feature dynamically assigns or modifies the EPG association of virtual machines based on their attributes?

  • A. vzAny contracts
  • B. standard contracts
  • C. application EPGs
  • D. uSeg EPGs

Answer: D

Explanation:
Section: ACI Fabric Infrastructure

 

NEW QUESTION 47
Refer to the exhibit.

An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?

  • A. MAC Pinning-Physical-NIC-load
  • B. LACP Active
  • C. LACP Passive
  • D. MAC Pinning+
  • E. Static Channel - Mode On

Answer: D

 

NEW QUESTION 48
......

Penetration testers simulate 300-620 exam: https://www.exam4docs.com/300-620-study-questions.html

Bestselling On-The-Job Reference Exam Questionshttps://drive.google.com/open?id=1YEklHWFIbB96Beog-o-sMsj3SDTrDbnw