Latest Jan-2024 Cisco 350-501 Dumps Updated 373 Questions
PDF Download Free of 350-501 Valid Practice Test Questions
Preparation for 350-501 exam requires a comprehensive understanding of network concepts and protocols, along with hands-on experience in implementing and troubleshooting service provider networks. Candidates taking 350-501 exam must also have knowledge of Cisco equipment and their capabilities. 350-501 exam is designed to test the individual’s practical knowledge of troubleshooting tools and techniques and analytics.
NEW QUESTION # 124
Refer to the exhibit:
Which configuration prevents the OSPF neighbor from establishing?
- A. duplex
- B. mtu
- C. default-metric
- D. network statement
Answer: B
NEW QUESTION # 125
Refer to the exhibit:
Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
- B. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
- C. The router uses NSF to load balance traffic on a routed EtherChannel
- D. The router uses NSF to load balance traffic between two links, with the primary link alternating every
90 seconds
Answer: A
NEW QUESTION # 126
What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 127
After implement MPLS protocol for multiple VRFs on a single Cisco device, the engineer notices all VRFs on the router still do to not LDP session protection feature enabled.
When configuration must the engineer apply to enable the LDP session protection feature FOR LDP neighbors within each VRF?
- A. Configure LDP session authentication on the device to enable LDP session protection on each VRF automatically
- B. Configure LDP session protection within the individual VRFs.
- C. Configure LDP session protection globally on the device only.
- D. Configure LDP session protection globally on the device and on each neighbor that requires session protection.
Answer: B
NEW QUESTION # 128
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network.
Which configuration must the engineer apply on the router to accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 129
An engineer is developing a configuration script to enable dial-out telemetry streams using gRPC on several new devices. TLS must be disabled on the devices.
Which configuration must the engineer apply on the network?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 130
Refer to the exhibit:
Which effect of this configuration is true?
- A. The two routers fail to form a neighbor relationship because their system IDs are different.
- B. The two routers fail to form a neighbor relationship because they have different ISIS area types.
- C. The two routers fail to form a neighbor relationship because the authentication configuration is missing
- D. The two routers successfully form a neighbor relationship
Answer: D
NEW QUESTION # 131
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes TCP connections that are authenticated with a clear-text password
- B. R1 establishes TCP connections that are authenticated with an MD5 password
- C. R1 establishes UDP connections that are authenticated with an MD5 password
- D. R1 establishes UDP connections that are authenticated with a clear-text password
Answer: B
NEW QUESTION # 132
How does SR policy operate in Segment Routing Traffic Engineering?
- A. An active SR policy installs a BSID-keyed entry in the forwarding table to steer the packets that match the entry to the SR policy SID-list.
- B. An SR policy for color and endpoint is deactivated at the headend as soon as the headend learns a valid candidate path for the policy.
- C. When "invalidation drop" behavior occurs, the SR policy forwarding entry is removed and the router drops all traffic that is steered into the SR policy.
- D. When a set of SID lists is associated with the SR policy designated path, traffic steering is ECMP- based according to the qualified cost of each SID-list.
Answer: A
NEW QUESTION # 133
Refer to the exhibit. ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer's IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-export additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - B. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefixlist AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop local-address
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - C. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community local-as additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - D. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY
Answer: A
NEW QUESTION # 134
Refer to the exhibit.
Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION # 135 
Refer to the exhibit. A network operator needs to shut down interface Gi0/0/0/2 for maintenance. What occurs to the interface states of Gi0/0/0/0 and Gi0/0/0/1?
- A. Gi0/0/0/0 becomes active; Gi0/0/0/1 remains standby
- B. Gi0/0/0/1 and Gi0/0/0/0 become active
- C. Gi0/0/0/1 and Gi0/0/0/0 remain standby
- D. Gi0/0/0/1 becomes active; Gi0/0/0/0 remains standby
Answer: A
Explanation:
Section: Networking
NEW QUESTION # 136 
Refer to the exhibit. An engineer must configure router R2 as the new P router in the network. Which configuration must be applied to R2 to enable LDP-IGP Sync on its L2 IS-IS adjacencies?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: MPLS and Segment Routing
Explanation/Reference:
NEW QUESTION # 137
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
- A. It requires all PE-CE sessions to support NSR
- B. It operates normally without NSR support on the PE peers
- C. It cannot sync state information across redundant RPs
- D. It consumes more memory and CPU resources than NSF
- E. It requires routing protocol extensions
Answer: B,D
Explanation:
Section: Networking
NEW QUESTION # 138
A network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN Inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Section: Networking
NEW QUESTION # 139 
Refer to the exhibit. If router A is the RP, which PIM mode can you configure so that devices will send multicast traffic toward the RP?
- A. PIM-SM
- B. BIDIR-PIM
- C. PIM-DM
- D. PIM-SSM
Answer: A
Explanation:
Section: Services
NEW QUESTION # 140
Refer to the exhibit. An engineer implemented OSPF neighbor relationship on an IOS device.
Which configuration must be applied to get the OR/BOR election removed from interfaces running OSPF?
- A. ip ospf network multipoint-to-point on interfaces running OSPF
- B. ip ospf network non-braodcast on interfaces running OSPF
- C. ip ospf network braodcast in interfaces running OSPF
- D. ip ospf network point-to-point on interfaces running OSPF
Answer: D
NEW QUESTION # 141 
Refer to the exhibit. R101 is peering with R102 and R103, and R201 is peering with R202 and R203 using iBGP Labeled Unicast address families. The OSPF area 0 border routers are in a full iBGP Labeled Unicast mesh, and VPNv4 routes are exchanged directly between PE routers R101 and R201 through iBGP. Which address family-level configuration must be applied on ABR R102 on ABR R102 to support a Unified MPLS routing architecture with partitioned IGP domains?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: Services
NEW QUESTION # 142
Refer to the exhibit. What is significant about the number 2 in the configuration?
- A. It dictates the number of sessions that can be open with the SNMP manager
- B. It represents the version of SNMP running
- C. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent
- D. It indicates two SNMP managers can read and write with the agent using community string cisco test
Answer: C
NEW QUESTION # 143
Drag and drop the methods of Cisco MPLS TE tunnel traffic assignment from the left onto their characteristics on the right.
Answer:
Explanation:
NEW QUESTION # 144
......
Topics of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
These core topics listed below are general recommendations for the material that is likely to be used for the 350-501 exam test. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes. It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. Following topics can also be found in the 350-501 exam dumps:
- Transitioning to IPv6
- Implementing Virtualization in Service Provider Environments
- Implement BGP Security
- Implement Segment Routing
- Implement MPLS L3VPN
- Implementing QoS
- Deploy Cisco IOS XR and IOS XE Basic Device Configuration
- Describing Service Provider Network Architectures
- Implementing High Availability in Networking
- Describing VPN Services
- Implementing Data Plane Security
- Describing QoS Architecture
- Implementing IS-IS
- Filter BGP Prefixes Using RPL
- Introducing Cisco NSO
- Describing Cisco IOS Software Architectures
- Implement Cisco MPLS Traffic Engineering (TE)
- Implement Ethernet over MPLS (EoMPLS)
- Configuring L3VPN Services
- Implementing Route Maps and Routing Protocol for LLN )Low-Power and Lossy Networks), RPL
- Implement Remotely Triggered Black Hole (RTBH) Filtering
- Describing Segment Routing
- Implement Basic BGP Routing
- Implement MPLS in the Service Provider Core
- Implementing Cisco MPLS Traffic Engineering
- Implementing BGP
- Implementing Control Plane Security
- Introducing Network Programmability
- Implement Integrated IS-IS Routing
- Implementing Multicast
350-501 Test Engine files, 350-501 Dumps PDF: https://www.exam4docs.com/350-501-study-questions.html
Latest Cisco 350-501 PDF and Dumps (2024) Free Exam Questions Answers: https://drive.google.com/open?id=1Wnkr68Syz9Rtx6lXWmSKnUK6opFwFEZI
