[Jan 15, 2022] 700-905 Dumps PDF and Test Engine Exam Questions - Exam4Docs
Verified 700-905 exam dumps Q&As with Correct 52 Questions and Answers
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 18
Which two processes does failure on a node initiate? (Choose two.)
- A. The system is marked unhealthy but remains operational.
- B. Affected node is marked as unhealthy and placed into standby mode
- C. Distributed pooled data is migrated off nodes to master data store.
- D. A call-home process is initiated and the failure is reported to TAC
- E. The VMs on the failed node are moved to another node by vSphere high availability
Answer: A,E
NEW QUESTION 19
With which three components must every HyperFlex cluster be equipped with in regard to disks?
(Choose three.)
- A. NVMe drives
- B. there are no specific requirements
- C. same number of capacity drives
- D. SAS drives
- E. same type of cache drives
- F. same type and size of capacity of drives
Answer: C,E,F
Explanation:
NEW QUESTION 20
How much memory is reserved for the controller VM in the HX220c?
- A. 24 GB
- B. 12 GB
- C. 78 GB
- D. 48 GB
Answer: D
NEW QUESTION 21
Which three features for NVMe transfer protocol are valid? (Choose three.)
- A. Streamlined commands for fewer CPU instructions
- B. More and deeper queues
- C. Increases memory speed for more lOPs
- D. Requires 10 controller
- E. Improves SAS and SATA speed
- F. Uses PCIe interface
Answer: A,B,F
NEW QUESTION 22
The process of optimizing information is tightly tied to the writing process as it is performed inline as the writing process is being performed The process of data optimization is performed with which two processes? (Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- C. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
- D. ACK is sent to the CVM that the write is about to be initiated
- E. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
Answer: A,B
Explanation:
NEW QUESTION 23
Which three features do Managed Deployments provide? (Choose three.)
- A. High availability of the management system and connectivity when using 2 Cisco Fabric Interconnects
- B. Decentralized yet complex management of an entire UCS domain.
- C. Increased operating overhead, raising Operating Expenses (OpEx)
- D. Great tor managing large deployments, scalability, and oversight of the UCS servers.
- E. Individual configuration of each redundant fabric or global configuration.
- F. Consistent deployment by replicating working configurations from development labs to the production
deployment
Answer: A,C,D
NEW QUESTION 24
HyperFlex is tightly integrated Into the Cisco portfolio, allowing which two powerful service integrations'' (Choose two)
- A. Data Center Network Monitor: This management platform enables administrators to monitor storage In the HyperFlex solution and provide real-time storage performance for the HyperFlex cluster
- B. On-premise container platform: Cisco Container Platform automates repetitive tasks, such as installing Kubernetes and Docker, installing analytics tools, creating clusters, load balancing, curatmg the OS. and even updating the distribution
- C. Cloud mobility: CloudCenter enables workload mobility between HyperFlex and public and private clouds, Including private cloud self-service Infrastructure as a service (laaS) capabilities
- D. Multi-cloud integration Workloads are able to seamlessly migrate to platforms such as Amazon Web Services: Microsoft Azure and Google Cloud Platform
- E. Application centric infrastructure: ACI enables faster deployment via End-Point Group integration of the HyperFlex clusters into existing application environments
Answer: B,C
Explanation:
NEW QUESTION 25
Which two processes does failure on a node initiate? (Choose two.)
- A. The system is marked unhealthy but remains operational.
- B. Affected node is marked as unhealthy and placed into standby mode
- C. Distributed pooled data is migrated off nodes to master data store.
- D. A call-home process is initiated and the failure is reported to TAC
- E. The VMs on the failed node are moved to another node by vSphere high availability
Answer: A,E
Explanation:
NEW QUESTION 26
Which two results are expected when you replace a node or expand a cluster? (Choose two.)
- A. The cluster profile is updated and RAID takes care of rebalancing the load.
- B. Affected node is marked as unhealthy and placed into standby mode
- C. Distributed pooled data is migrated off nodes to master data store.
- D. On node replace, the self-healing must finish for the cluster to be healthy
- E. vSphere DRS migrates the virtual machines to the new node to balance the load
Answer: D,E
Explanation:
NEW QUESTION 27
Which two features enable RAID cards striping as well as mirroring and parity? (Choose two.)
- A. Distributed drives across disparate systems can be in RAID together.
- B. Hot replacement of drives available, depending on configuration
- C. Integration with Cisco Intersight for a cloud-based storage management solution.
- D. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
- E. No load on the system resources, drives seem as one drive to the operating system
Answer: B,E
Explanation:
NEW QUESTION 28
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)
- A. Write-back (default): Only write information and most commonly used information are deposited in the cache
- B. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
- C. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
- D. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance
- E. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance
- F. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache
Answer: A,C,E
Explanation:
NEW QUESTION 29
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?
- A. in VCenter virtual machine image
- B. in UCS Manager server profiles
- C. in non-volatile memory on the VIC
- D. in UCS Manager service profiles
Answer: C
NEW QUESTION 30
Which version of HXDP was the first to support multiple VICs on a single server?
- A. HXDP 4.0
- B. HXDP 3.5.1
- C. HXDP 3.0
- D. HXDP 3.5
Answer: B
Explanation:
NEW QUESTION 31
HyperFlex uses file system native snapshots and provides which three features? (Choose three.)
- A. limitations in age and number of snapshots. See user manual for limitations
- B. impact on the VM performance after a lot of writes, requiring future administration
- C. automatically deduplicating data of snapshots through StorFS
- D. automatic update to the golden image when a configuration change is made
- E. on datastore level, snapshots work the same as vSphere snapshots
- F. consolidation of snapshots is still manual but not necessary
Answer: A,C,E
NEW QUESTION 32
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?
- A. Check the administrative workflow option during the cluster creation process
- B. Check the extended memory option during the cluster creation process
- C. Check the GPU workflow during the cluster creation process
- D. Check Run UCS Manager Configuration during the cluster creation process
Answer: C
NEW QUESTION 33
......
Cisco 700-905 Test Engine PDF - All Free Dumps: https://www.exam4docs.com/700-905-study-questions.html
