Huawei H31-341 Dumps Updated [Sep-2021] Get 100% Real Exam Questions! [Q63-Q78]

Share

[Sep-2021] Pass Huawei H31-341 Exam in First Attempt Guaranteed!

Full H31-341 Practice Test and 202 unique questions with explanations waiting just for you, get it now!

NEW QUESTION 63
ODUk SNCP protection cannot be automatically switched. The possible reasons are: (Multiple Choice)

  • A. Electrical cross configuration error
  • B. SNCP type setting error
  • C. Waiting for the recovery time to be set too long
  • D. Set the lock or forced switch command

Answer: A,B,C,D

 

NEW QUESTION 64
When creating a Client path using the path method, if the RL0S alarm is generated on the line card, the path cannot be created.

  • A. TRUE
  • B. FALSE

Answer: B

 

NEW QUESTION 65
Which of the following description of the ASON software structure is correct? (Multiple Choice)

  • A. The transmission plane refers to the traditional transmission network.
  • B. Intelligent software main application management plane
  • C. Intelligent optical network consists of three planes
  • D. Management plane mainly refers to upper management such as network management

Answer: A,C,D

 

NEW QUESTION 66
The causes of discrete services are as follows:

  • A. A subnet service whose source or sink port is not in the management scope of the U2000 is available.
  • B. The logical fiber connection of the NE is inconsistent with the physical fiber connection.
  • C. The configuration data on the NE side is not uploaded to the U2000.
  • D. The cross-connection configuration on the NE is incorrect.

Answer: C

 

NEW QUESTION 67
When the board detects that the error rate of the regenerator section signal exceeds 10 by detecting the B1 byte, the B1_SD alarm is reported.

  • A. TRUE
  • B. FALSE

Answer: B

 

NEW QUESTION 68
In the Colored&Directioned scenario of the 4D ROADM, if you want to implement local service scheduling in four directions, how many sets of M40V+D40 are needed?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 69
The user-oriented interface and the interface for the transport network of the E-Line service are
____ and _____.

  • A. UNI, UNI
  • B. NNI, UNI
  • C. NN, NNI
  • D. UNI, NNI

Answer: D

 

NEW QUESTION 70
For an MSTP device, the service layer path is a path existing on the network management side, and the client layer path is a path existing on the network element side.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 71
Which of the following alarms trigger optical line protection switching?

  • A. MUT_LOS
  • B. R_LOS
  • C. R_LOF
  • D. POWER_DIFF_OVER

Answer: B

 

NEW QUESTION 72
Which of the following residual dispersion values are within the dispersion tolerance of the TN52ND2 board?

  • A. 900ps/nm
  • B. 600ps/nm
  • C. 700ps/nm
  • D. 500ps/nm

Answer: B

 

NEW QUESTION 73
Which of the following ROADM boards have WSS optical modules?

  • A. WSD9
  • B. WSM9
  • C. RDU9
  • D. WSMD9

Answer: B

 

NEW QUESTION 74
Which of the following statement is correct?

  • A. Deactivation will delete the configuration of the U2000, which has no impact on the device side services.
  • B. The optical layer path must be deleted first when the electrical layer path is removed.
  • C. The optical layer path and the electrical layer path are independent. It is not necessary to delete the electrical layer path when deleting the optical layer path.
  • D. When the OCh path exists, you can directly create a client path. The NMS automatically creates an ODUk path.

Answer: C

 

NEW QUESTION 75
When the cross-board is configured with 1+1 hot backup, in the case of normal switching, the replacement of the cross-clock board does not affect the packet service.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 76
When 10-minute error-free test is performed on a certain wavelength division channel, the local end uses the SDH analyzer to interconnect with the client-side interface of the OTU board. The peer OTU client-side interface needs to perform fiber self-loop. When you are self-looping, you must add solid decay.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 77
Which of the following Optical NE types are defined in U2000?

  • A. WDM_OTM
  • B. WDM OADM
  • C. WDM_OEQ
  • D. WDM_OLA

Answer: C

 

NEW QUESTION 78
......

Get Latest H31-341 Dumps Exam Questions in here: https://www.exam4docs.com/H31-341-study-questions.html