[2024] Use Valid Exam HPE0-S59 by Exam4Docs Books For Free Website
Free HPE Technical HPE0-S59 Official Cert Guide PDF Download
HP HPE0-S59 exam is a multiple-choice exam consisting of 60 questions. Candidates have 90 minutes to complete the exam and must achieve a passing score of 70% or higher to earn their certification. HPE0-S59 exam is administered by Pearson VUE, a leading provider of computer-based testing services, and can be taken at any of their testing centers around the world.
NEW QUESTION # 29
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
Answer:
Explanation:
NEW QUESTION # 30
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 31
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- B. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
Answer: B
NEW QUESTION # 32
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there is at least one ISCSI network configured that will provide access to the module.
- B. If there Is a logical interconnect created based on the 12Gb SAS switches.
- C. If the D3940 storage module is property licensed through HPE OneView interface.
- D. If the D3940 module is imported in managed state that allows volume provisioning.
Answer: D
NEW QUESTION # 33
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: C
NEW QUESTION # 34
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- B. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- C. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- D. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- E. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
- F. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
Answer: C,D
NEW QUESTION # 35
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Superdome Flex system
- B. HPE ProLiant DL580 Gen10
- C. HPE Synergy 480 Gen10 Plus
- D. HPE ProLiant OL380 Gen 10 Plus
Answer: C
NEW QUESTION # 36
Which statement about HPE Superdome Flex 280 is true?
- A. It can support up to two nPars with an external RMC.
- B. It must be equipped with at least 768 GB of memory.
- C. It supports 2 to 8 sockets in 2-socket increments.
- D. it cannot be managed using HPE OneView.
Answer: B
NEW QUESTION # 37
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Modify an existing logical interconnect to include second HPE Synergy frame.
- B. Move one of the master modules to the appropriate interconnect bay in the second frame.
- C. Create a new logical enclosure based on both HPE Synergy frames.
- D. Create a new logical interconnect group and enclosure group for two frames setup
- E. Re-parent an existing enclosure group to the new logical interconnect group.
Answer: A,C
NEW QUESTION # 38
Which statement about the HPE D3940 storage module is true?
- A. it is configured through CLl available from HPE Synergy console
- B. Up to five modules can be installed in a single frame with Gen10 servers
- C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- D. SATA drives requires redundant 10 adapters to be installed in this module
Answer: A
NEW QUESTION # 39
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?
- A. Compute nodes must have a second CPU installed to access the second fabric.
- B. Each compute node must have at least 768GB of memory installed
- C. Interconnect modules that provide SAS connectivity should be moved to the third fabric
- D. Each interconnect module in each fabric must be properly licensed in HPE OneView
Answer: B
NEW QUESTION # 40
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It cannot be mixed with Gen9 compute modules in the same frame.
- B. It supports 8 memory channels and memory DIMMs of up to 256GB.
- C. It only supports NVDIMM Persistent Memory.
- D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
Answer: C
NEW QUESTION # 41
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 42
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
Answer: C
NEW QUESTION # 43
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- B. Only HPE Superdome Flex 280 can support multiple nPars
- C. Only HPE Superdome Rex 280 can be managed using HPE OneView
- D. Only HPE Superdome Flex supports HPE Persistent Memory
Answer: C
NEW QUESTION # 44
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if both FiexNICs are connected to different networks
- B. If the logical enclosure is built on at least three HPE Synergy frames
- C. if both FiexNICs are configured with the same speed
- D. if the logical enclosure is configured with redundant master modules
Answer: C
NEW QUESTION # 45
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE ProLiant DL560 Gen10
- C. HPE Superdome Flex 280
- D. HPE ProLiant DL380 Gen 10 Plus
Answer: D
NEW QUESTION # 46
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The additional frame cannot have 12Gb SAS connection modules installed
- B. The customer can grow the existing logical enclosure up to 5 frames
- C. The customer has to create a new logical enclosure for the additional frame
- D. The additional frame must have HPE Virtual Connect FC modules installed
Answer: C
NEW QUESTION # 47
Which compute node parameters are captured within server hardware type?
- A. Number of the CPUs
- B. installed operating system
- C. Size of the memory Installed
- D. Mezzanine card configuration
Answer: B
NEW QUESTION # 48
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 49
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments are licensed per node not per physical socket
- B. All new HPE SimpliVity models are based on AMD CPUs
- C. All new HPE SimpliVity models support deduplication and compression
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
Answer: C
NEW QUESTION # 50
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: C
NEW QUESTION # 51
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. To use interconnect bay set 3, all compute nodes must be half-height
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 52
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
Answer: B
NEW QUESTION # 53
......
HP HPE0-S59 (HPE Compute Solutions) Certification Exam is a professional certification exam that validates the skills and knowledge of IT professionals in designing, deploying, and managing HPE compute solutions. HPE Compute Solutions certification exam is designed for IT professionals who are responsible for managing HPE compute solutions in enterprise environments.
HP HPE0-S59 exam is an industry-recognized certification that can help IT professionals enhance their career prospects and demonstrate their expertise in HPE compute solutions. HPE Compute Solutions certification is particularly relevant for individuals who are involved in designing, deploying, or managing HPE compute solutions in their organizations. HPE0-S59 exam is also suitable for individuals who are interested in pursuing a career in IT, as it provides a solid foundation in HPE compute solutions.
HP HPE0-S59 Official Cert Guide PDF: https://www.exam4docs.com/HPE0-S59-study-questions.html
Exam HPE0-S59: HPE Compute Solutions - Exam4Docs: https://drive.google.com/open?id=1o0yczmT_dqw7qdvPE-sthni58O3VLA_n
