[2023] New JN0-635 exam dumps Use Updated Juniper Exam
Verified JN0-635 Dumps Q&As - JN0-635 Test Engine with Correct Answers
NEW QUESTION 51
Click the Exhibit button.
You have configured integrated user firewall on the SRX Series devices in your network.
However, you noticed that no users can access the servers that are behind the SRX Series devices.
Referring to the exhibit, what is the problem?
- A. There are no authentication entries in the SRX Series device for the users.
- B. The Kerberos service is not configured correctly on the Active Directory server.
- C. The SAML service is not configured correctly on the Active Directory server.
- D. The security policy on the SRX Series device is configured incorrectly.
Answer: A
NEW QUESTION 52
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configured solution allows IPv4 to IPv6 translation.
- B. The IPv6 address is invalid.
- C. The configured solution allows IPv6 to IPv4 translation.
- D. External hosts cannot initiate contact.
Answer: B,C
NEW QUESTION 53
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. An IPsec group VPN with the corporate firewall acting as the hub device.
- B. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- C. Full mesh IPsec VPNs with tunnels between all sites.
- D. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
Answer: A
Explanation:
Reference:
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION 54
Which configurable SRX Series device feature allows you to capture transit traffic?
- A. syslog
- B. archival
- C. traceoptions
- D. packet-capture
Answer: C
NEW QUESTION 55
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task?
(Choose two.)
[edit security flow]
- A. user@srx# set load-distribution session-affinity ipsec
- B. user@srx# set ipsec-performance-acceleration
[edit security flow] - C. user@srx# set power-mode-ipsec
[edit security flow] - D. user@srx# set tcp-mss ipsec-vpn mss 65535
[edit security flow]
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-improving-ipsec- vpn-traffic-performance.html
NEW QUESTION 56
Your organization has multiple Active Directory domains to control user access. You must ensure that security policies are passing traffic based upon the users' access rights.
What would you use to assist your SRX Series devices to accomplish this task?
- A. JSA
- B. JATP Appliance
- C. Junos Space
- D. JIMS
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth- intergrated-user-firewall-overview.html
NEW QUESTION 57
Your SRX Series device does not see the SYN packet.
What is the default action in this scenario?
- A. The device will forward the subsequent packets and the session will not be established
- B. The device will forward the subsequent packets and the session will be established
- C. The device will drop the subsequent packets and the session will be established
- D. The device will drop the subsequent packets and the session will not be established
Answer: D
NEW QUESTION 58
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT64
- B. NAT46
- C. persistent NAT
- D. DS-Lite
Answer: A
NEW QUESTION 59
You have downloaded and initiated the installation of the application package for the JATP Appliance on an SRX1500. You must confirm that the installation of the application package has completed successfully.
In this scenario, which command would you use to accomplish this task?
- A. show services application-identification application detail
- B. show services application-identification application version
- C. show services application-identification status
- D. show services application-identification version
Answer: D
NEW QUESTION 60
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. lookup
- B. rules
- C. routing-socket
- D. configuration
Answer: A
NEW QUESTION 61
Which IDP rule configuration will send an RST to any new session that meets the action criteria?
- A. action drop-connection
- B. ip-action block
- C. ip-action close
- D. action close-client-and-server
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-idp-policy-rules- and-rulebases.html
NEW QUESTION 62
Click the Exhibit button.
Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance.
However, you are unable to use IPsec power mode.
What is the problem?
- A. IPsec power mode cannot be used with advanced services
- B. IPsec power mode cannot be used with IPsec performance acceleration
- C. IPsec power mode cannot be used with high IPsec maximum segment size values
- D. IPsec power mode requires that you configure a policy-based VPN
Answer: A
NEW QUESTION 63
When would you use the port-overloading-factor 1 setting?
- A. to set the maximum port-overloading capacity to 65,536
- B. to enable the port-overloading
- C. to disable the port-overloading
- D. to map ports with 1:1 ratio for port-overloading
Answer: C
NEW QUESTION 64
Click the Exhibit button.
Your company has purchased a competitor and now must connect the new network to the existing one. The competitor's gateway device is receiving its ISP address using DHCP. Communication between the two sites must be secured; however, obtaining a static public IP address for the new site gateway is not an option at this time. The company has several requirements for this solution:
* A site-to-site IPsec VPN must be used to secure traffic between the two sites;
* The IKE identity on the new site gateway device must use the hostname option; and
* Internet traffic from each site should exit through its local Internet connection.
The configuration shown in the exhibit has been applied to the new site's SRX, but the secure tunnel is not working.
In this scenario, what configuration change is needed for the tunnel to come up?
- A. Bind interface st0 to the gateway
- B. Apply a static address to ge-0/0/2
- C. Change the IKE policy mode to aggressive
- D. Remove the quotes around the hostname
Answer: D
NEW QUESTION 65
Click the Exhibit button.
Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
- A. monitor mode
- B. sniffer mode
- C. integrated mode
- D. in-line tap mode
Answer: C
NEW QUESTION 66
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable the split tunneling feature within the VPN configuration on the SRX Series device
- B. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Enable IKEv2 within the VPN configuration on the SRX Series device
Answer: B,C
Explanation:
Reference:
vpns-with-ncp-exclusive-remote-access-client.html
NEW QUESTION 67
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication?
(Choose two.)
- A. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- B. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
- C. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
- D. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
Answer: C,D
NEW QUESTION 68
......
Juniper JN0-635 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Pass Your JN0-635 Dumps as PDF Updated on 2023 With 173 Questions: https://www.exam4docs.com/JN0-635-study-questions.html
