100% Pass Top-selling NS0-526 Exams - New 2021 Network Appliance Pratice Exam
NetApp Certified Dumps NS0-526 Exam for Full Questions - Exam Study Guide
NEW QUESTION 61
Click the Exhibit button.
You have a SnapProtect v11 environment as shown in the exhibit.
What are the two defaultSnapshot copies created automatically after creating a Storage Policy. (Choose two.)
- A. Primary (NetApp)
- B. Primary (Tape)
- C. Primary (Classic)
- D. primary (Snap)
Answer: C,D
NEW QUESTION 62
In a MetroCluster IP configuration, which two network portsmust be connected to dedicated switches?
(Choose two.)
- A. the port associated with the node management LIF
- B. the port associated with the MetroCluster IP LIF
- C. the port associated with the cluster LIF
- D. the port associated with the intercluster LIF
Answer: A,C
NEW QUESTION 63
Click the Exhibit button.
You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand Unified Manager, there are no files available to restore.
Referring to the exhibit, what caused this problem?
- A. The engineering volume is unprotected.
- B. The engineering volume is currently online.
- C. Workflow Automation is not configured to restore files from Snapshot copies.
- D. No Snapshot copies exist for the engineering volume.
Answer: C
NEW QUESTION 64
What are two capabilities enabled by Snapshot copies? (Choose two.)
- A. Write to the Snapshot copy.
- B. Create a clone of a FlexVol volume.
- C. Recover previous versions of a file that was deleted.
- D. Change the volume language of a secondary Snapshot copy.
Answer: B,C
NEW QUESTION 65
You have deployed a 4-node fabric MetroClusterconfiguration for cross-site disaster-recovery protection. In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation?
(Choose two.)
- A. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.
- B. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
- C. AUSO is enabled by default on a MetroCluster cluster.
- D. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
Answer: C,D
NEW QUESTION 66
Click the Exhibit button.
You have data corruption in a volume, and you are asked to restore the data froma SnapVault destination.
Referring to the exhibit, which two actions occur when the volume is restored? (Choose two.)
- A. The restore is performed over theintercluster LIFs.
- B. All files in the volume are restored.
- C. The restore is performed locally.
- D. Only files that have changed in the volume are restored.
Answer: A,D
NEW QUESTION 67
An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.
In this scenario, which two actions must you take to make the volume writable again? (Choose two.)
- A. Delete the SnapMirror relationships.
- B. Delete the files in the active file system.
- C. Delete Snapshot copies until space is available.
- D. Delete the SnapVault relationships.
Answer: C,D
NEW QUESTION 68
You want to write custom workflows to perform disaster recovery operations for your environment in OnCommand Workflow Automation.
In this scenario, which two scripting languages would be used to accomplish this task? (Choose two.)
- A. PHP
- B. Powershell
- C. Perl
- D. Python
Answer: B,C
NEW QUESTION 69
Click the Exhibit button.
Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)
- A. SnapCenter Application Plugin
- B. SnapCenter Host Plugin
- C. Host OS (OS)
- D. Browser
Answer: B,C
NEW QUESTION 70
You have experienced a disaster at your source site and activated SVM DR. The source site is now up, but your source SVMs no longer exist. You must restore data to the original source and maintain the SVM DR configuration.
Which two steps must be taken to accomplish this task? (Choose two.)
- A. Replicate the data from the disaster-recovery site to the new source with volume SnapMirror.
- B. Delete the existing SVM peer relationship.
- C. Create the new source SVM by creating an SVM disaster-recovery relationship from the original destination.
- D. Delete the cluster peer relationship.
Answer: A,B
NEW QUESTION 71
You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space.
Which three actions are available to perform from the OCUM events detail Web page? (Choose three.)
- A. Create a job to move the FlexVol.
- B. Add a note to the event.
- C. Acknowledge the event.
- D. Mark the event as "resolved".
- E. Increase the capacity of the FlexVol.
Answer: C,D
NEW QUESTION 72
A customer wants to create a new SnapMirror relationship to provide only disaster recovery for their organization. Which relationship type and policy type should they specify in this scenario?
- A. DP and XDPDefault
- B. XDP and MirrorAllSnapshots
- C. DP and MirrorAndVault
- D. XDPand XDPDefault
Answer: B
NEW QUESTION 73
All of your CIFS file shares reside on a single NetApp volume. You are asked to ensure that your files are kept for seven days locally, and for 30 days off-site.
What is the correct solution?
- A. Use SnapVoult locally for 7 days and use Snapshot to a remote system for 30 days.
- B. Use SnapVoult locally for 7 days and use SnapMirror to a remote system for 30 days.
- C. Use SnapMirror locally for 7 days and use SnapMirror to a remote system for 30 days.
- D. Use Snapshot locally for 7 days and use SnapVault to a remote system for 30 days.
Answer: D
NEW QUESTION 74
You want to create an application-consistent Snapshot copy by using SnapCenter software. What is required to accomplish this task?
- A. SnapDrive for Windows Server
- B. VMware VM Tools
- C. NetApp NFS Plug-in for VMware VAAI
- D. Plug-in for Microsoft Exchange
Answer: A
NEW QUESTION 75
You have completed the baseline copy for a new inter-cluster SnapMirror relationship.
How do you verify the baseline without making the destination volume writable?
- A. Create a FlexClone volume clone of the SnapMirror source volume and then verify the clone.
- B. Break the mirror and verify the destination volume online.
- C. Create Snapshot copy and a FlexClone volume clone of the SnapMirror destination volume.
- D. Break the mirror and verify the source and destination volumes.
Answer: C
NEW QUESTION 76
You wantto generate performance-related reports and alerts using the OnCommand Unified Manager 6.x server. Which two additional tasks must be completed to enable these features?
(Choose two.)
- A. Install and configure OnCommand Workflow Automation.
- B. Create a local user with limited Event Publisher role privileges
- C. Configure a connection between the Unified Manager server and OnCommand System Manager.
- D. Configure a connection between the Unified Manager server and a Performance Manager server.
Answer: B,D
NEW QUESTION 77
A client has a VMware vSphere environment with several MS SQLservers currently running that provides back-end Web services. You are asked to prepare a disaster recovery solution that would minimize downtime if any of these virtual machines become corrupted and unavailable.
Which solution will satisfy the requirement?
- A. Use the NetApp SnapCenter software to take a complete backup of the entire virtual server that is hosting the database.
- B. Use the NetApp SnapCenter plug-in for VMware vSphere to take a complete backup of the entire virtual server that is hosting the database.
- C. Use the NetApp Virtual Storage Console snapshot function to take a complete backup of the entire virtual server that is hosting the database.
- D. Use the NetApp SnapCenter software to take a consistent backup of the database and operating system, followed by another Snapshot copy of the virtual server.
Answer: B
NEW QUESTION 78
Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do to create the SnapMirror relationship?
- A. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
9.1 and then create the XDP SnapMirror relationship. - B. The customer can create a DP type SnapMirror relationship without needing to perform an upgrade.
- C. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
8.3 and then create the XDP SnapMirror relationship. - D. The customer can create a XDP type SnapMirror relationship without needing to perform an upgrade.
Answer: C
NEW QUESTION 79
Click the Exhibit button.
Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?
- A. Delete the relationship and recreate it.
- B. Resynchronize the relationship.
- C. Initialize the relationship.
- D. Change the schedule to hourly.
Answer: A
NEW QUESTION 80
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum.
In this scenario, how much burst time do they need to purchase?
- A. 60 minutes
- B. 45 minutes
- C. 15 minutes
- D. 30 minutes
Answer: B
NEW QUESTION 81
You want to generate performance-related reports and alerts using the OnCommand Unified Manager 6.x server.
Which two additional tasks must be completed to enable these features? (Choose two.)
- A. Install and configure OnCommand Workflow Automation.
- B. Create a local user with limited Event Publisher role privileges
- C. Configure a connection between the Unified Manager server and OnCommand System Manager.
- D. Configure a connection between the Unified Manager server and a Performance Manager server.
Answer: B,D
NEW QUESTION 82
You have deployed a MetroCluster IP disaster recovery solution for cross-site protection and business continuity operations.
In this scenario, whichtwo statements are correct? (Choose two.)
- A. Replication of storage data is performed over the iSCSI connections between the two sites.
- B. Replication of storage and NVRAM data is performed overhigh-bandwidth dedicated links in the IP fabric.
- C. Replication of storage data is performed over a high-bandwidth dedicated FC fabric and NVRAM over high-bandwidth dedicated links in the IP fabric.
- D. Replication of storage data is performed over high-bandwidth dedicated links in the IP fabric and NVRAM over a high-bandwidth dedicated FC fabric.
Answer: A,D
NEW QUESTION 83
You want toreplicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault).
To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.
Which productwould accomplish this task?
Response:
- A. OnCommand Insight
- B. OnCommand System Manager
- C. OnCommand Unified Manager
- D. Commvault IntelliSnap
Answer: B
NEW QUESTION 84
Click the Exhibit button on the right.
Referring to the exhibit, which two tiers are monitored in the volume capacity? (Choose two)
- A. licensed
- B. performance
- C. capacity
- D. metadata
Answer: B,C
NEW QUESTION 85
......
Authentic Best resources for NS0-526 Online Practice Exam: https://www.exam4docs.com/NS0-526-study-questions.html
