View All D-NWG-DS-00 Actual Free Exam Questions Dec 03, 2025 Updated
Pass Authentic EMC D-NWG-DS-00 with Free Practice Tests and Exam Dumps
NEW QUESTION # 30
Which of the following is an essential part of deployment support to prevent downtime during the go-live phase?
Response:
- A. Scheduling system backups
- B. Conducting a final network assessment
- C. Enabling traffic monitoring tools
- D. Implementing IP address restrictions
Answer: B
NEW QUESTION # 31
What is the purpose of modifying a network design template?
Response:
- A. To replace all static IP addresses
- B. To ensure that it applies specifically to the current project's requirements
- C. To increase the speed of network traffic
- D. To comply with all network security policies
Answer: B
NEW QUESTION # 32
Which tasks are typically included in the scoping phase of a network design project?
Response:
- A. Identifying business objectives
- B. Defining deliverables
- C. Installing network devices
- D. Estimating project costs
Answer: A,B,D
NEW QUESTION # 33
Which is a limitation of FastList?
Response:
- A. Delay in loading is evident on substantial lists.
- B. It cannot be used with extensive lists.
- C. Is not compatible with Microsoft Edge.
Answer: A
NEW QUESTION # 34
Match the following scripting tools with their respective functions in network design:
Tool
FastScript
Unisphere for PowerMax
Solve Online
EPS Tool
Function
A) Automates network configuration tasks
B) Monitors and manages network performance
C) Provides step-by-step guidance for maintenance
D) Estimates power and environmental requirements
Response:
- A. FastScript - A
- B. FastScript - A
- C. FastScript - A
- D. FastScript - D
Answer: A
NEW QUESTION # 35
Which tool is typically used during the scoping phase to identify and prioritize networking project requirements?
Response:
- A. FastList
- B. Control Station
- C. PowerSwitch
- D. Unisphere
Answer: A
NEW QUESTION # 36
What troubleshooting type is the show ip route command used for?
Response:
- A. Layer 1
- B. Layer 3
- C. Layer 2
Answer: B
NEW QUESTION # 37
A customer is planning for a Cyber Recovery vault. They want the vault to have the strongest level of protection from external connections. The vault must be able to send out SMTP data out. What device should be connected on the edge of the vault?
Response:
- A. Data Diode
- B. Router
- C. Firewall
- D. Air gap
Answer: A
NEW QUESTION # 38
What are two requirements when configuring DCB iSCSI?
Response:
- A. The Design Architect should work with the Storage Architect to verify compatibility with the planned storage arrays.
- B. DCB iSCSI VLAN must be configured as untagged.
- C. iSCSI HBA NPAR must be configuration while configuring DCB iSCSI.
- D. DCB iSCSI must be configured for all Dell storage arrays connecting to Dell OS10 switch.
- E. Switches must be configured for treating dot1p priority 4 as lossless.
Answer: A,E
NEW QUESTION # 39
Match the following scoping phase tools to their respective functions:
Tool
FastList
Financial Force
EPS Tool
PowerSwitch
Function
A) Identifies and organizes project requirements
B) Estimates costs and budget
C) Calculates power and environmental needs
D) Manages network hardware configurations
Response:
- A. FastList - A
- B. FastList - A
- C. FastList - A
- D. FastList - C
Answer: B
NEW QUESTION # 40
What is the primary purpose of using templates in a network design project?
Response:
- A. To automate network configuration
- B. To generate real-time network traffic reports
- C. To assign IP addresses dynamically
- D. To standardize documentation and ensure consistency
Answer: D
NEW QUESTION # 41
Why is it important to test scripts generated by FastScript in a lab environment before applying them to live systems?
Response:
- A. To confirm that the scripts are compatible with all connected devices
- B. To identify any errors or conflicts that could affect the live network
- C. To reduce the time spent on deployment
- D. To ensure that the scripts meet enterprise security standards
Answer: B
NEW QUESTION # 42
What is a characteristic of DAC?
Response:
- A. DAC does not provide visible serial numbers in the CLI.
- B. The transmitting side and the receiving side have different serial numbers.
- C. The serial numbers should be identical on both ends of the network
Answer: C
NEW QUESTION # 43
Which of the following tasks can be automated using FastScript in a networking project?
Response:
- A. IP address assignment
- B. Device monitoring
- C. Routing table updates
- D. VLAN configuration
Answer: A,C,D
NEW QUESTION # 44
What are two roles of a design architect?
Response:
- A. Creating a new order list while planning for a network change
- B. Updating the PM and account team if additional orders are required
- C. Communicating with sales and the delivery team
- D. Planning for upgrading an existing network device in a customer's environment
Answer: B,C
NEW QUESTION # 45
FCoE allows the convergence of __________ and storage networking protocols over the same physical infrastructure, reducing the need for separate networks.
Response:
- A. IP
- B. SAN
- C. LAN
- D. WAN
Answer: B
NEW QUESTION # 46
Which tasks are performed during the scoping phase to align the network design with business requirements?
Response:
- A. Implementing network security policies
- B. Identifying project requirements and constraints
- C. Scheduling network monitoring solutions
- D. Installing routers and switches
Answer: B
NEW QUESTION # 47
What is the primary function of the Troubleshooting Template in network documentation?
Response:
- A. It records and tracks network issues and their resolutions
- B. It provides a detailed list of all VLANs and their configurations
- C. It manages software licensing for network devices
- D. It verifies network configurations after deployment
Answer: A
NEW QUESTION # 48
What is the purpose of deployment support in troubleshooting network issues during installation?
Response:
- A. To analyze network traffic patterns
- B. To provide ongoing network monitoring
- C. To configure access control lists
- D. To identify and resolve connectivity and configuration problems
Answer: D
NEW QUESTION # 49
Under which use case is an Enterprise SONiC implementation recommended?
Response:
- A. Cloud-level hyperscale implementation
- B. Multipurpose OS implementation
- C. Small-to-medium business implementation
- D. Implementation that requires traditional SNMP monitoring
Answer: A
NEW QUESTION # 50
......
New D-NWG-DS-00 Exam Questions Real EMC Dumps: https://www.exam4docs.com/D-NWG-DS-00-study-questions.html
Course 2025 D-NWG-DS-00 Test Prep Training Practice Exam Download: https://drive.google.com/open?id=1T43RaihDPPePaNlPp-4rpcNWcdwvQUwo
