Responsible company

We think of writing the most perfect TS: Windows Server 2008 R2, Server Virtualization torrent vce and most considerate aftersales services as our unshakable responsibility. We are so dedicated not for fishing for compliments but most important, for relieves you of worries about exam. As a responsible company with great reputation among the market, we trained our staff and employees with strict beliefs to help you with any problems about our 070-659 practice questions, who are staunch defender to your interests. What is more, we have optimized the staff and employees to choose the outstanding one to offer help. It is a win-win situation for you and our company to pass the TS: Windows Server 2008 R2, Server Virtualization practice exam successful. So we never stop the pace of offering the best services and 070-659 free questions. That is exactly the aims of our company in these years.

Confused by numerous practice materials flooded into the market, customers from all different countries feel the same way. How to identify the most helpful one from them? It is difficult to make up their minds of the perfect one practice material. We understand it is an exhausting process, which weigh their down mentally and physically. Especially of those expensive materials that cost a fortune while help you a little. The worst thing is they are exactly stumbling block on your way to success. However, our TS: Windows Server 2008 R2, Server Virtualization accurate questions with the best reputation in the market instead can help you ward off all unnecessary and useless materials and spend all limited time on practicing most helpful questions as much as possible. To get to know more about their features of MCTS TS: Windows Server 2008 R2, Server Virtualization practice torrent, follow us as passages mentioned below.

DOWNLOAD DEMO

Effective review process

To candidates saddled with burden to exam, our TS: Windows Server 2008 R2, Server Virtualization pdf vce is serving as requisite preparation for you. Our 070-659 valid pdf can stand the test of time and have been first-rank materials for ten years with tens of thousands of regular clients all over the world. Why? You may wonder. Actually, it is the effective preparation you may have after obtaining them, and you do not need to spend day and night anxiously for this MCTS latest torrent like others. With the effective TS: Windows Server 2008 R2, Server Virtualization practice pdf like us you can strike a balance between life and study, and you can reap immediate harvest by using our TS: Windows Server 2008 R2, Server Virtualization updated vce.

Positive outcome

With passing rate up to 98-100 percent, our Microsoft study guide has help our customers realized their dreams as much as possible. If you master the certificate of the TS: Windows Server 2008 R2, Server Virtualization test engine in the future, you will not run with the crowd anymore. In contrary you can stand out in your work and impressed others with professional background certified by exam. Self-fulfillment will not in oral anymore. Getting sense of satisfaction is the realistic achievement ahead of you, and you can stand a better chance of getting better working condition. If you haven't passed the TS: Windows Server 2008 R2, Server Virtualization prep training, you can get full refund without any reasons or switch other versions freely.

Microsoft TS: Windows Server 2008 R2, Server Virtualization Sample Questions:

1. A company has a Windows Server 2008 R2 Hyper-V server environment. The environment is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2.
You need to add a new dynamic virtual hard disk (VHD) to an existing virtual machine (VM).
What should you do?

A) Add a disk drive to the VM by using the iscsicli.exe command line tool.
B) Assign 1 GB of startup RAM and 4 GB of maximum RAM to the VM.
C) Assign 4 GB of static memory to the VM.
D) Add an emulated network adapter to the VM and select the Enable spoofing of MAC addresses option.
E) Add a disk drive to the VM by using the New-VirtualDiskDrive PowerShell cmdlet.
F) Install the server application in a VM with the latest supported integration components.
G) Add a synthetic network adapter to the VM and select the Enable spoofing of MAC addresses option.
H) Add an emulated network adapter to the VM and select the Enable virtual network optimizations option.
I) Assign 1 GB of startup RAM and 8 GB of maximum RAM to the VM.
J) Add a synthetic network adapter to the VM and select the Enable virtual network optimizations option.
K) Add a disk drive to the VM by using the Add ClusterSharedVolume PowerShell cmdlet.
L) Install the server application on a physical server.

2. A company has a 64-bit server with a quad-core processor. The server runs Windows Hyper-v Server 2008 R2 Service pack(SP) 1. The server will host five virtual machines (VMs) with SP1 integration services installed. VM1, VM2, and VM3 use the maximum number of logical processors. Resources allocation for VMs is configured as shown in the following table.

The environment must be configured to meet the following resource allocation requirements:
-VM4 must be able to consume up to half of each processor
-VM5 must not start if VM1, VM2, VM3, and VM4 are running.
-VM4 must use the maximum number of logical processors available on the Hyper-V host
-VM4 must share CPU resources evenly with VM3 during peak usage on the Hyper-V host
You need to configure VM4 to meet the requirements.
How should you configure VM4? (To answer, drag the approbate setting from the list of choices to the correct locations in the answer area.)
Select and Place:

3. A company is deploying Windows Server 2008 R2 Remote Desktop services (RDS).
Another administrator has installed RDS client access licenses (CALs) on the Remote Desktop license server.
You need to ensure that the Remote Desktop Session Host (RD Session Host) server requests licenses from the Remote Desktop license server.
What should you do first?

A) Install the RD Licensing role service.
B) Create an RDS farm and add the RD Session Host to the farm.
C) Activate the Remote Desktop license server.
D) Configure Remote Desktop licensing mode on the RD Session Host.

4. All serves on your network run Windows Server 2008 R2. All client computers run Windows 7. You deploy remote desktop Services (RDS).
You are configuring the Remote Desktop Session Host (RD Session Host) role services.
You need to configure the RD Session Host Servers to ensure that all communication between client computers and servers users 128-bit encryption.
What should you do?

A) In the RD Session Host Configuration tool, require the SSL (TLS 1.0) security layer.
B) In the Group Policy Object Editor, configure the set client encryption level setting to high.
C) In the RD Session Host Configuration tool, require the RDP security layer.
D) In the Group Policy Object Editor, configure the Set client encryption level setting to the FIPS Compliant.

5. A company has a Windows Server 2008 R2 Hyper-V server environment. The environment is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. There is an existing 10 GB iSCSI storage area network (SAN).
A logical unit number (LUN) will be mounted from the iSCSI SAN. The LUN will be used as a disk drive inside of a virtual machine (VM). The VM must meet the following requirements:
-Support VM Queuing (VMQ)
-Have a network speed of at least 10 Gbps
-Minimize CPU utilization
You need to prepare the VM to support the LUN.
What should you do?

A) Add a synthetic network adapter to the VM and select the Enable spoofing of MAC addresses.
B) Assign l GB of startup RAM and 8 GB of maximum RAM to the VM.
C) Install the server application n a VM with the latest supported integration components.
D) Assign 4 GB of static memory to the VM.
E) Add a disk drive to the VM by using the iscsiccli.exe command line tool.
F) Add an emulated network adapter to the VM and select the Enable virtual network optimizations option.
G) Add an emulated network adapter to the VM and select the Enable spoofing of MAC addresses o
H) Add a disk drive to the VM by using the New- VirtualDiskDrive PowerShel cmdlet
I) Assign l GB of startup RAM and 4 GB of maximum RAM to the VM.
J) Add a synthetic network adapter to the VM and select the Enable virtual network optimizations option.
K) Add a disk drive to the VM by using the Add ClusterSharedVolume PowerShell cmdlet.
L) Install the server application on a physical server.

Solutions: