Choose C2180-274 most accurate study material

A solution implementer is considering the following active-standby configuration between two DataPower appliances:

In a simulated power failure of Appliance 1 using this active-standby configuration in a sandbox environment, Appliance 2 did not take over the active interface. What could be causing this behavior?

• A. Appliances in the active-standby configuration must be in the same network subnet and broadcast domain.
• B. In an active-standby configuration, thepriority of Appliance 2 must be changed to 99 for the failure takeover to work.
• C. It can take several minutes for the standby interfaces to be active in an active-standby configuration.
• D. There might be a firewall between the two appliances which has not been configured to allow broadcast traffic in an active-standby configuration.

A solution implementer has been taskedwith monitoring a service and filtering requests based on how long an external backend service takes to respond. The solution implementer has chosen to use the message duration monitor in the DataPower service.
Which "measure" value must the solution implementer configure to satisfy this requirement?

• A. Server
• B. Messages
• C. Requests
• D. Responses

An multi-protocol gateway (MPGW) service is created to process a request message containing values for the MQMD.ReplyQ andMQMD.ReplyToQMgr that are not configured in the MPGW service. The back end service sends a SOAP message as response to the MPGW service that needs to be routed to the originating client using MQ Object Descriptor (MQOD) method. How can the solution implementer accomplish this requirement using the configured MPGW service?

• A. Using XSLT, inject service virtual headers named "ReplyToQ" and "ReplyToQM" with
  the value of an empty string in the request rule as shown below:
  <dp:set-request-header name="'ReplyToQ'" value="' '"/>
  <dp:set-request-header name="'ReplyToQM'" value="' '"/>
• B. Using Header Tab, inject service virtual headers named "ReplyToQ" and "ReplyToQM"
  with the value of an empty string for the back end with a direction as "back"
• C. Using XSLT, inject service virtual headers named "ReplyToQ" and "ReplyToQM" with
  the value of an empty string inthe response rule as shown below:
  <dp:set-response-header name="'ReplyToQ'" value="' '"/>
  <dp:set-response-header name="'ReplyToQM'" value="' '"/>
• D. Using Header Tab, inject service virtual headers named "ReplyToQ" and "ReplyToQM"
  with the value of an empty string for the front end with a direction as "front"

A solution implementeris creating a multi-protocol gateway to proxy SFTP server requests. An AAA Policy is configured on the SFTP front side handler to provide user authentication for the SFTP connection. Which Extract Identity method should the solution implementer configurein the AAA Policy to extract the SFTP user's credentials?

• A. Client IP Address method.
• B. CustomTemplate method, specifying a url to a custom stylesheet that will determine the credentials.
• C. Processing Metadata method, specifying the sftp-metadata metadata item.
• D. Processing Metadata method, specifying the ssh-password-metadata metadata item.

A solution implementer is deploying four DataPower XI52 appliances in a production environment. The requirement is to evenly distribute clienttraffic across all four appliances without using an external load balancer. The firmware on these four appliances has the Application Optimization feature enabled. A standby Virtual IP address (VIP) has also been configured on each appliance with self-balancing enabled, and each VIP specifies the same standby group. No other appliance network settings have been changed. What should the solution implementer verify with the network team to ensure that this configuration will work? Ensure the network supports:

• A. multiple MAC addresses per Ethernet port.
• B. gratuitous ARP.
• C. rapid spanning tree.
• D. virtual MAC takeover.