Choose 6006-1 most accurate study material

Avaya 6006-1 Exam Overview:

Avaya 6006-1 Exam Syllabus Topics:

Avaya Aura(TM) Communication Manager (R5.2.1) Implementation Sample Questions:

Question 1

A technician is testing calls from IP phones at a remote location on a G450/LSP to main location served by S83XX/G450 over the WAN. Busy tones are received when multiple calls between the two locations are already active. The network regions and G 711 and G 729 codec set have been set up.
Which two steps must be taken to ensure the branch IP phones are using the minimum WAN bandwidth when calling main location stations? (Choose two)

A. Use the IP-network map form to assign the branch IP phones to network region 2.
B. Assign G.729 as primary codec in station form for the branch IP phones.
C. Create a third codec Set and assign to the G450 gateway in IP-network-region 2 form.
D. Assign branch IP phones to the G450 LSP as its call server in IP-network-region-2 form.
E. Verify calls between NR1 and NR2 use G729 codec in IP-network-region 1 form

Question 2

A customer uses a S8510 server with a Media Gateway G650. No more circuit pack slots are left and the customer has already ordered and received the necessary components for adding additional DCP phones to the system, including a new G850.
Which three tasks need to be performed while installing the additional equipment?
(Choose three)

A. Cable the two G850 carries with a TDM/LAN Bus Extender cable.
B. Add additional 2GB of RAM to the S8510 server.
C. Remove the right TDM/LAN bus terminal from the bottom G850 carrier and install the bus terminator at the left end of the TDM/LAN bus on the G650 carrier directly above.
D. The new digital line card must be installed din slot 2 of new G650
E. Set the proper carrier address ID for the second G650 carrier.

Question 3

A customer has Avaya IP phones located at a remote site connected via a remote link. The end users complain that intermitterently there is no audio or only one way audio when on a call. The customer limited the UDP port range in their routers to be 5000 to 6000.
Which command in the Avaya S87xx Server is used to find the UDP port range?

A. Status ip-network-map
B. Display system-parameter ip
C. Display ip-network-region
D. Status station

Question 4

In the event of network or server failure, the connection preserving migration (CPM) feature preserves existing bearer (voice) connections while the H248 media migrates from one Communications Manager Server to another.
What are users expected experience on preserved calls during the migration?

A. CPM will utilize Alternate Gatekeeper list functions to preserve all user features including Hold, Conference, or Transfer.
B. Recovery operations and functions remain stable during CPM so all CM features are available.
C. CPM will extend the time period for recovery operations and functions but users cannot use features such as hold, Conference, or Transfer
D. CPM will extend the time period for recovery operations and functions so features such as hold, Conference, or transfer will be available to users on preserved calls.

Question 5

In the function of processor Ethernet (PE) in a simplex S88XX primary is allowed for H.248 Gateway Registration.
What is H.248 gateway registration implemented in the S88XX Server using Processor Ethernet?

A. H.248 registration is administered through the communication-interface-processor-channels form.
B. CM Software automatically enables use of PE for H.248 Gateway registration so no other administrative procedure is required.
C. H.248 Registration is administered through the ip-interface procr form.
D. CM software automatically enables use of PE for H.248 Gateway registration through the CLAN interface so no other administrative procedure is required.

Solutions: